Friday, June 24, 2016

Canvas Painting for Beginners: How to Prepare a Canvas

In a previous blog I discussed the different grades of watercolor paper so, in all fairness to the other mediums, this art supplies tutorial will give insight on how to prepare adequate surfaces for the opaque mediums: oil, acrylic and pastel.

In leading art stores you will find already manufactured canvases and canvas boards. Some are very costly, such as linen ($20 for a 12×16-inch canvas) and you can even find the same size in a dollar store ($2.00 for a 12×16) cotton fabric. Is the cost worth it? Are the cheap canvases worth the savings? I have tried the dollar store ones and realized some of them are under-gessoed so I add another layer of gesso. Shall I opt for the middle range? Artists are faced with this dilemma all the time so I feel my professional insight will help you make the right decision.

Canvas Painting for Beginners: Linen vs Cotton

Linen is the most costly of them all. Many professionals mention that their plein air paintings are done on this surface. This gives the impression they can afford it and are successful so you will often see the title of the painting plus “on linen” specified under their paintings. I admit, linen is more cooperative than cotton as a painting surface. But I don’t feel it’s worth the additional cost unless you are being paid for that painting or know you will sell it. The collector will feel more proud of the acquisition knowing you used the top materials. Duration isn’t a reason to justify favoring either cotton or linen because both use the same primers. Some artists complain that the weave of a cotton canvas is too mechanical, whereas with linen it is more random. Also worth noting is that many top landscape artists resort to dry brushing; linen lends itself nicely to these effects because some areas of the weave bulge more.

Canvas painting for beginners | Johannes Vloothuis,

Close up of linen canvas for artists. You can see an irregular pattern.

Unless you have money to spare I don’t think the expense merits working on a linen canvas for painting. Both cotton and linen canvases are either primed with acrylics or oil. Acrylic gesso-primed surfaces have a bit more friction, giving you more brush control for detail, whereas oil-primed surfaces are more slippery (Note: Do not use oil-primed canvas for acrylics.) Neither is better than the other. It’s personal preference. Both of these fabrics are either stretched and mounted on wooden bars or glued on cardboard boards and commercially sold. In my opinion, presenting a painting on a cardboard board looks cheap to a collector even if linen is mounted on it. It also will not offer enough protection against humidity or insects. Obviously stretched canvases will increase the price. Some artists like the spring or feeling of a tight drum of the stretched canvas. To me it makes no difference. As a side note, I feel too much instructional attention goes to art supplies rather than to the building blocks of good painting design. If you are competent in techniques, the surface is not much of an issue.

Canvas painting for beginners | Johannes Vloothuis,

Close up of cotton canvas for painters. The tooth is quite fine.

How to Paint: Preparing Your Own Painting Surfaces

Here are some options you can experiment with if you have the time to prepare your own painting surfaces and want to save a bundle, especially if you paint a lot. If you still want to use linen or cotton you can buy it by the roll, cut out your own sizes and then glue them to wooden panels. You can use acrylic gel medium as glue for a few units or buy a gallon of Miracle Muck glue if you intend to make them in series. Here the cost per unit will considerably drop since the labor is no longer factored in. Mounting these on stretcher boards is not worth the work, so forget that. The best option is to order an 8×4 foot birch wood panel at a lumber store and have them cut this panel into smaller units. I mostly work on 9×12, 11×14 or 12×16 canvases for outdoor painting and my online art demos.

Because lumber stores do not usually charge for cutting, the savings are substantial.These raw boards are good for absorbing the glue as well. You’ll end up with quite a few individual boards. Once you have these units you have the following two options:

  1. Paste sections cut out from a roll. In case you decide to paste from a roll make sure the size is a 1/4 inch larger on each side to compensate when the fabric shrinks when it gets wetted by the glue, then cut off the residue. This still takes some work.
  2. Gesso your own surface. Take into account that thin boards will warp when they become damp, so wet both sides when adding the glue or gesso. You can use 1/8 inch boards for small panels; 1/4 inch will be necessary for larger sizes; 1/2 inch for 24×30 inches or larger. Birch wood is light weight so these canvases are handy for transporting on a plein air painting trip.

Painting on Canvas for Beginners: Gesso Your Own Painting Surfaces

I find this to be the most viable option. Again the success of a painting is in your decision making (That’s where my online classes will benefit you), not the surfaces. I am a lazy artist and want to do the least work possible so I prefer to gesso panels instead of pasting canvas. There are three options:

  1. A flat, smooth non-textured gesso. This is suitable for fine detail such as wild life and portraits. Apply three coats and do not water down.
  2. A mildly textured surface. Gesso with Liquitex Super Heavy Gesso using a fine fabric roller. Do not water down. This will leave some pointed protrusions and will work well for dry brushing, which is a technique I often use to indicate foliage and grass in landscape paintings. Give a sanding after each coat so the protrusions aren’t too predominant. Apply only two coats. I find these prepared panels to work the best for small sizes.
  3. Heavy textured surface. This is an excellent option to show convincing landscape texture. You can save a lot of money on paint as well. I would use this for painting larger than 16×20 inches. The rule of thumb is small panels should not take on heavy texture for simplicity; increase the texture as the size get larger. Do your general landscape drawing on a first layer of Liquitex Super Heavy gesso done in a smooth application. Apply a second coat straight out of the container in the same manner and paint your shapes by applying heavy loads on your brush.

For example, a waterfall will have downward strokes following the water movement. Trees would take on broken, choppy strokes. Paint rocks with “band aid strokes” or even a palette knife with white heavy gesso. Remember, you’re emulating the actual colored pigment application. Pretend you are actually painting. Leave the smooth areas that will not have texture for contrast such as lakes, rivers and skies. It is important to have the smooth vs textured areas so the texture stands out when contrasted with the smooth areas.

Canvas painting for beginners | Johannes Vloothuis,

Sample of textured canvas with Liquitex Super Heavy Gesso

Allow it to dry a couple of days, then apply the paint but in this case you do not need to apply heavy paint because you did that already with the gesso, a great savings technique! Again, consider that a 12×16 panel may warp so wet the opposite side as you apply the first layer of gesso. This whole procedure will enhance the painting and help convey a 3-dimensional aspect.

Canvas painting for beginners | Johannes Vloothuis,

Toned canvas

How to Paint:Toning a canvas

Pastel paper is known to come in different colors. You can also tone your canvas before you paint. I use burnt sienna acrylics with very little water and apply a thin transparent wash over the white canvas. You can do this on any gessoed surface. The advantage of this is when you apply thin paint in the dark areas, such as in summer trees, some of that orange will glow through. I do this for green trees. You can also tone your canvas to a blue-gray in case you do a nocturne or foggy day. That cool background will influence the colors. This also helps you avoid having little white dots where paint didn’t completely cover the canvas.

Preparing Painting Surfaces for Pastels

Most of the time pastel artists paint on sanded paper. Some may not find this very presentable to collectors because the painting is done on “paper” and the artist may want to give them a more handsome, sturdy presentation. You can prepare your own pastel boards with a pastel ground sold in major art stores, then simply follow the instructions on the container.

“Landscape Painting Essentials” and other video courses are available at North Light has also just released a new eBook written by Johannes titled Landscape Painting Essentials. Join his online art classes at

The post Canvas Painting for Beginners: How to Prepare a Canvas appeared first on Artist's Network.

No comments:

Post a Comment